B2822 Regulated DC Power Supply, Unipolar
 Description:
This regulated power supply assembly is designed to convert the AC power line to a stable, low voltage, unipolar DC source. Models are available to provide either 5, 10, 12, 15 or 24 volts DC to the connected load. Models are available with either positive or negative output voltages. This power supply will operate with both 115 or 230 volts AC, single phase, 50 or 60 Hz. power line inputs. This device is typically used to provide a stable power source for transducers and other electronic devices that do not include internal voltage regulators.
This industrial grade module is built on a single circuit board and includes an isolation transformer, a full wave center tapped rectifier, filter and a linear voltage regulator. A fuse is supplied to protect the output from short circuits.
A control is included on the circuit board to adjust the output voltage up to plus or minus 10% from the nominal value. The linear voltage regulator features both thermal and overcurrent shutdown protection. Rated output current is available over the entire rated temperature range. The change in output voltage will not exceed 2% as the power line input voltage, output load current and ambient temperature are varied over the specified operating range.
The circuit board is solder masked and conformal coated. All external wiring connections are made to a barrier type terminal block with #6-32 captive wire clamping plates. All external connections are clearly marked on the board. The board can be mounted in the user's control enclosure on standoffs or located in plastic mounting track.
Applications:
Used to convert the ac power line to a low voltage, regulated dc source.
Downloads:
Model selection sheet = MS2822
Data sheet = DS2822
|
|
 |
Label Expo Draws Closer
July 3rd, 2008
Summer is here and soon the Label world will be converging on Chicago for the annual LabelExpo America's show being held September 9 - 11 at the Donald E. Stephens Convention Center... more
Nireco Enjoys Great Success at Drupa
July 3rd, 2008
Drupa 2008 was an international success for Nireco... more
Nireco Office Established in Sao Paulo
July 3rd, 2008
In March 2008 a new Nireco office was established in Sao Paulo, Brazil... more
Nireco's New 100% Inspection System for Label Printers Sets New Standards for Performance and Price
2007-11-19
The Latest Nireco Print Inspection System Offers New Features and Control Algorithms for the Label Market, at a Price That Has Printers Buzzing.
more
Nireco America Acquires Datatran Labs, Inc.
2007-09-07
more
|
|
