B3163 Linear DC Voltage Regulator
Description:
This linear voltage regulator assembly is designed to convert the input DC power line to a stable, lower voltage, unipolar DC output. Models are available to provide a selection of output voltages from 5 to 24 volts DC to the connected load. Both positive or negative output voltage configurations are available. The positive 5 volt output model is capable of supplying a maximum of 3 amps to the connected load. Other voltage configurations will deliver up to 1 amp to the connected load. This device is typically used with an unregulated dc source to provide a stable power supply for transducers and other electronic devices that do not include internal voltage regulators.
This industrial grade module is built on a single circuit board and includes a capacitor input filter, a linear voltage regulator and a output status indicator. A fuse is supplied to protect the output from short circuits.
Both fixed and adjustable outputs are available. The adjustable output models include a control on the circuit board to adjust the output voltage up to plus or minus 10% from the nominal value. The linear voltage regulator features both thermal and overcurrent shutdown protection. Rated output current is available over the entire rated temperature range. The change in output voltage will not exceed 2% as the power line input voltage, output load current and ambient temperature are varied over the specified operating range.
The circuit board is solder masked and conformal coated. All external wiring connections are made to a single, plug-in terminal block. All external connections are clearly marked on the board. The board mounts in the included plastic track. The track is secured to the user's panel with double sided adhesive tape.
Applications:
Used to provide regulated dc power to one or more devices connected to an unregulated dc power distribution system. Provides point of load regulation at various voltages.
Downloads:
Model selection sheet = MS3163
Data sheet = DS3163
|
|
 |
Label Expo Draws Closer
July 3rd, 2008
Summer is here and soon the Label world will be converging on Chicago for the annual LabelExpo America's show being held September 9 - 11 at the Donald E. Stephens Convention Center... more
Nireco Enjoys Great Success at Drupa
July 3rd, 2008
Drupa 2008 was an international success for Nireco... more
Nireco Office Established in Sao Paulo
July 3rd, 2008
In March 2008 a new Nireco office was established in Sao Paulo, Brazil... more
Nireco's New 100% Inspection System for Label Printers Sets New Standards for Performance and Price
2007-11-19
The Latest Nireco Print Inspection System Offers New Features and Control Algorithms for the Label Market, at a Price That Has Printers Buzzing.
more
Nireco America Acquires Datatran Labs, Inc.
2007-09-07
more
|
|
